3-in-1 cable connection | Connection & installation

Problems with Replay or OnDemand? Perhaps your cable is plugged into the wrong hole!

Take the test: You can only use our additional services if your Horizon HD Recorder or your HD Mediabox is connected correctly.


Which TV socket have you got at home?



Select your receiver



Install your Horizon HD Recorder

Attach adapter to connector cable | 3-in-1 cable connection

Step 1

Attach your adapter to the connector cable.

Connect connector cable to 3-in-1 cable connection | upc cablecom

Step 2

Connect the connector cable to the 3-in-1 cable connection.


Note:  Your 3-in-1 cable connection may also be fitted the other way round. Make sure that you connect the connector cable to the socket outlined in blue!

Connect connector cable to Horizon box | Horizon HD Recorder installation

Step 3

Connect the connector cable to the Horizon box.

Our Shops and Service Points

Have you got further questions or do you require a new cable?

Come and visit us in one of our Shops. If there is no UPC Shop or Service Point near where you live, your specialist TV retailer will be happy to help.

Find UPC Shops and Service Points in Switzerland

General questions

To be able to use the additional services, your Horizon HD Recorder or your HD Mediabox must have a return path-compatible connection. That means that it is not only able to receive signals (such as the TV signal), but is also able to send signals back to us via the “return path”. This is necessary so that you can use our additional services. The return path-compatible connection is only guaranteed if you connect your device correctly to the 3-in-1 cable connection, however. If this is not the case, your device will receive the TV signal, but not send a signal back and will therefore not activate any additional service. 

The return path compatibility of your connection allows you to watch a film in MyPrime or OnDemand. This selection has to be sent to our server so that we can provide you with the correct film. The sending of this selection is referred to as the «return path». 

The multimedia adapter is required if you wish to use several receivers such as an HD Mediabox and a modem, for example, with the same 3-in-1 cable connection. It also helps you connect your receivers correctly thanks to the labelled sockets. 


Do you require further assistance?